View Cart

Draft Supplies

« Return to Product Categories


Beer Dispensing

Sanke "D" Keg Coupler Chrome Plated brass probe (black Handle)

$44.95

This keg coupler connects to the keg valve and attaches both the beer hose to the coupler and the gas line from the CO2 tank/regulator. The coupler is manufactured from high quality material with a durable forged brass body and probe that improves its durability and it's resistance to chemicals. This coupler comes with a fully integrated pressure relief valve (60 PSI) to prevent over-pressurization. Also features a short lever pull handle that is ideal for smaller diameter kegs. It is best to confirm the one you need before you buy it.

Please Note: A Tail Piece Assembly is recommended as these parts are needed to properly hook up a Sanke Coupler to tubing.

Add to Cart

Sanke "D" Keg Coupler with SS Probe

$59.95

Stainless Steel "D" Style Sanke Coupler is the probe that contacts beer is made from durable 304 stainless steel. It features a high-capacity pressure relief valve that is build directly into the coupler body. When functioning with other relief devices in the system, it will prevent a keg from reaching pressures in excess of recommended working pressure. Also, it allows the user to relieve pressure when needing to prevent or correct dispensing problems. The pull lever handle is black and controls the flow of gas; up position is off, down position is on.

To install rotate clockwise on the keg valve until secure. Squeeze the lever handle and push down; this opens the keg valve and pressure inlet on the coupler. You are now ready to dispense. This coupler can be quickly dismantled for cleaning and periodic service. No special tools required.

Add to Cart

Tap Handle: Coal Black 6.5" with badge Holder

$16.95

Coal Black badge holder tap handle made by Krome Dispense. This decorative handle measures 6 1/2" in height and weighs in at a discrete 8oz. Fits all standard North American taps. Using this particular tap handle allows you to use your own graphics and badges allowing you to easily identify different beers on tap with a glance. 

Details:

  • Handle Material: Plastic Resin
  • Finale and Ferrule: Silver toned
  • Colour: Coal Black
  • Thread Size: 3/8"x16 UNC
  • Length: 6 1/2"

Add to Cart

Tap Handle: Eggshell White 6.5" with badge Holder

$16.95

Eggshell White badge holder tap handle made by Krome Dispense. This decorative handle measures 6 1/2" in height and weighs in at a discrete 8oz. Fits all standard North American taps. Using this particular tap handle allows you to use your own graphics and badges allowing you to easily identify different beers on tap with a glance. 

Details:

  • Handle Material: Plastic Resin
  • Finale and Ferrule: Silver toned
  • Colour: Eggshell White
  • Thread Size: 3/8"x16 UNC
  • Length: 6 1/2"

Add to Cart

2 way gas splitter Wye

$14.95

Chrome plated brass Y splitter base. 1/4" NPT right hand thread connects to your regulator. Easily configurable to anything you can think of.

Add to Cart

4' cobra Tap with 1/4" swivel set

$9.95

Used to dispense your favorite beer from kegs

Add to Cart

4' CobraTap with swivel connector and quick disconnect

$18.95

Come with your choice of ball lock or pin lock quick connect. You can also purchase without a connector for 9.95

Add to Cart

American Sanke Keg dispenser SS 4" pump

$94.95

Stainless Steel Sanke "D" Picnic Pump is compact and portable making it great for parties, picnics, or any social gathering. The small size and low cost makes it a must have for outdoor keg dispensing. It features a 4" cylinder pump, a 2' long picnic faucet assembly, and a Stainless Steel Sanke "D" coupler.

Details:

  • Finish: Chrome Plated Brass
  • Probe Material: Plated Brass
  • Keg Connection Type: "D" style
  • Pull Handle Material: 304 Stainless Steel
  • Coupler Body Material: 304 Stainless Steel

Dimensions:

  • Picnic Faucet Assembly Length: 2'
  • Pump Length: 4"
  • Total Length: 10 7/8"

Add to Cart

Ball Valve 1/4"B x 1/4"B (no Check)

$14.95

In line ball valve for both gas or liquid lines.

Add to Cart

Beer Nut washer

$.50

FDA approved Beer industry standard washer. This washer fits hex and wing nuts and eliminates leaks.
This washer has multiple uses in your Kegerator. It stops leaks between your beer faucet and shanks. It is the washer that goes on the beverage side of keg couplers. Also used where your shank attaches to your beverage line.

Add to Cart

Deluxe Beer Faucet, Nut & Beer Tower Wrench (Dual Ended)

$8.95

Specs:

    • Overall Length: 6 1/2" L

 

    • 1 1/16" Opening for coupling nuts with 1-1/16" hex for most beer towers

 

    • 1" Opening for 1" hex nuts and some beer towers

 

  • Durable Stainless Steel

Add to Cart

Drip Tray 10" x 6" x 3/4" Wall Mount

$49.95

This Drip Tray is a part of our premium drip tray line offering commercial grade quality, a strong durable design, and a beautiful finish. This drip tray is of the wall-mounted variety with a keyhole design for easy installation and removal.

Add to Cart

Drip Tray 12" x 7" 3/4" Cut Out, with drain

$79.95

Cut out drip tray! This product is for your 3" beer tower.12" X 7" X 3/4" depth surface drip tray. Beautifully brushed finish gives this drip tray a classic look. Made of stainless steel, this tray boasts a 1.2mm solid construction and is easy to clean.

A great fit for any of our 3" column beer towers!

Temporarily out of stock

Drip Tray 14" x 6" Surface Mount

$54.95

This Drip Tray is apart of our premium drip tray line offering commercial grade quality, a strong durable design, and a beautiful finish. This drip tray is of the surface mount variety which is ideal for setting up under your beer tower to catch drips and over pouring.

Add to Cart

Drip Tray 19"x 4" Surface Mount

$39.95

This Drip Tray is apart of our premium drip tray line offering commercial grade quality, a strong durable design, and a beautiful finish. This drip tray is of the surface mount variety which is ideal for setting up under your beer tower to catch drips and over pouring.

Add to Cart

Drip Tray 4"x 4" wall mounted

$24.95

4"x4 1/2"x3/4" Premium Stainless Steel Wall Mount Drip Tray

This Drip Tray is part of our premium drip tray line offering commercial grade quality, a strong durable design, and a beautiful finish. This drip tray is of the wall-mounted variety with a keyhole design for easy installation and removal. This model does not have a drain, however it is designed to be able to easily remove the tray, making cleaning a breeze. The dimensions of the tray are 4"x4 1/2"x3/4" with an ample 1" backsplash.

Add to Cart

Drip Tray 6" x 6"" Wall Mount Drip Tray

$24.95

Perfect for including in your draft or kegging kits. Stainless steel construction with removable tray. We tape in 2 screws for customer convenience.

Add to Cart

Hex Beer Nut

$1.95

FDA approved Beer industry standard Beer Nut. This Beer Nut fits all American standard shanks and faucets. Chrome plated.

Add to Cart

Intertap Auto Closing spring

$2.95

he Intertap Auto-Close Spring is made of stainless steel and is an ideal spring for turning your recessed shank and faucet set up into an auto-close one. The spring fits between the tap shank and the faucet within the set up, so when you release the handle the tap automatically closes. Allowing you to avoid wasting beer, and keeping your beer as bacteria free as possible. This spring is intended to be used with the Intertap family of products (not compatible with Intertap Flow Control Faucet).

A RECESSED SHANK AND TAP IS REQUIRED. It will not work with a shank or tap if it is not a recessed one, 

Add to Cart

Intertap Growler filler

$9.95

This Growler Filler includes an Intertap Growler Filler Spout, as well as 1' of 1/2" clear plastic tubing.
The Growler Filler Spout has a 1/2" (13mm) barb which you can attach some hose so you can fill your growler from the bottom up to minimise foaming.
Simply un-screw the regular nozzle and screw on the Growler Filler Spout with hose attached and use as you would a growler filler tap. 
Note: This item is the Growler Filler Spout and tubing only, it works ONLY with the Intertap line of taps.

Add to Cart

Kleen Plug

$2.95

The Kleen Plug beer faucet plug both keeps fruit flies out of your beer faucets when not in use, and scrubs them clean with an integral nylon brush each time you insert and remove the plug. 2½ inches long. Fits all beer faucets.To use: Before insertion, rinse the plug with warm water and shake dry. Insert the brush end first into the faucet opening until the plastic plug firmly seals the opening. Leave in place overnight. When removing, twist the plug to gently scrub the inside of the faucet.

To clean: Rinse with running water to release beer faucet residue from the brush. Occasionally soak the plug in a dilute sanitizing solution and then rinse before using.

Temporarily out of stock

Tailpiece 1/4 od barb

$3.95
FDA approved Beer industry standard 1/4"OD Tail Piece. This Tail Piece fits perfectly in Hex Beer Nuts. Used for couplers, shanks, and faucets.

Sizing:
1/4"OD
3/16"ID

Add to Cart

Tailpiece 1/4" mfl

$7.95

Tailpiece, 1/4mfl

Add to Cart

Tap Handle: Coal Black 5"

$14.95

Coal Black tap handle made by Krome Dispense. This decorative handle measures 5" in height and weighs in at a discrete 6oz. Fits all standard North American taps. Using different tap handles allows you to easily identify different beers on tap with a glance. 

Silver toned finale and ferrule
5" total length
Coal Black color plastic resin 
Female 3/8X16 UNC threaded to fit taps 

Add to Cart

Taprite Bronco Keg Pump

$69.95

The Bronco Pump is a compact air pump that fits any American-style single valve keg. It's size makes its convenient and portable. This high volume air pump is ideal for picnics, parties, and social gatherings. Features a metal D Sanke coupler, hose and faucet. Also includes a guide for proper tapping, cleaning and caring for your Bronco pump.

Pump Body no- spritz seal makes positive contact with keg valve prevents spritz from too much pressure in keg.
Easy to clean, just rinse and re-assemble.
Pressure relief vent.
Installs in one motion.
Sturdy, won t crack or break in normal usage.

Add to Cart

Taprite Pony Keg Pump

$49.95

The Pony Pump is a compact air pump that fits any American-style single-valve keg. It is the most convenient portable pump system on the market.This unit is ideal for picnics, parties, or any social gathering. Its size and low cost make it attractive to small groups and individuals that had not previously considered owning their own keg tapping equipment.

Handy Size and Weight: Compact in size, the complete system - pump, tubing, and faucet weighs just 12 ounces.

Stationary Probe: The probe which opens the keg valves is molded as an integral part of the one-piece pump body. This simplifies the pump and eliminates linkages and other moving parts.

'No-spritz' Seal: The pump body seal makes positive contact with the keg valve body as the probe first touches the valve. The seal is firmly compressed as the probe pushes the valves open. This prevents any 'spritz' from the pressure in the keg.

Pressure Release Vent: This serves two purposes. First, it eliminates foaming caused by overpumping. Second, it allows the user to safely relieve pressure from the keg before removing the pump.

Easy Cleaning: The pump can be quickly disassembled for cleaning. The pump body, tubing, and faucet can be immersed and rinsed in plain tap water.

Add to Cart

Tower 3" Single Faucet

$99.95
  • Total Height : 12”
  • Tower Finish : SS Polished
  • Tower Material : SS 304
  • Faucet Finish : Chrome Plated
  • Faucet Material : Brass
  • Includes 1 Standard US Faucets & knobs
  • Pre-fitted with 3/16” IDx5’ long NSF approved tubing with beer nut on one end
  • All mounting hardware & gasket Neoprene washer Air Cooled

Add to Cart

Tower 3" Dual faucet

$154.95
  • Total Height : 12”
  • Tower Finish : SS Polished
  • Tower Material : SS 304
  • Faucet Finish : Chrome Plated
  • Faucet Material : Brass
  • Includes 2 Standard US Faucets & knobs
  • Pre-fitted with 3/16” IDx5’ long NSF approved tubing with beer nut on one end
  • All mounting hardware & gasket Neoprene washer Air Cooled

Add to Cart

Bottling Equipment

Beer Gun Clip

$9.95

Replacement clip for Blichmann beer gun

Add to Cart

Blichmann Beer Gun

$129.95

What is the BeerGun? well, It is a new easy way to fill beer bottles with sediment-free carbonated beer from a kegging system without excessive foaming.

Filling bottles is a messy and time consuming adventure, even veteran's still frown on those tries that were still not perfect....To much foam.......

Beer foam is caused by the sudden change in pressure. Unlike awkward counter pressure fillers, the BeerGun does not pressurize the bottle to avoid a sudden change in pressure when filling, but instead relies on a very gradual reduction in pressure from keg pressure to the open air. By avoiding design features like ball valves and sharp bends in the flow path, the BeerGun gently reduces pressure on the carbonated beer as it flows through it, with the result being the cold carbonated beer that flows out has minimal foam, while still containing carbonation. A purge button behind the trigger lets you first flush the bottle with C02 before filling if desired to eliminate oxygen in the capped bottle. What matters is the BeerGun is easy to use, and makes filling sediment-free beer bottles from a keg an easy job instead of a chore. For successful use, beer must be below 40° F. and beer bottles must also be as close the keg temperture as possible.

Add to Cart

Blichmann Beer Gun Accessory Kits

$31.95

This optional accessory kit provides everything you need to get your BeerGun up and running! A liquid ball-lock disconnect, a 5ft length of hose for your CO2 line with 1/4" stainless flare connectors on each end, one stainless 1/4" disconnect and stainless clamp (for the 10ft beer hose that comes with the BeerGun), and a brass 1/4" NPT X 1/4" flare adapter for connecting to the CO2 valve on the BeerGun. Requires a spare CO2 port and shutoff valve on your regulator.

Temporarily out of stock

Blichmann Beer Gun tips 6/pk

$19.95

Replacement tips for the Blichmann Beer Gun

Add to Cart

Co2 & Nitrogen

Gas Manifold 6 way 3/8, 5/16 with check valves

$84.95

Six way manifold comes with 3/8" OD inlet  with six 3/8" OD outlets makes a secure fit on 5/16" and 3/8" gas line. This solid CO2 distribution manifold will serve six products from just one tank. Mount the manifold to the wall, and be confident that this commercial quality piece of equipment will deliver the CO2 you need to properly dispense and enjoy your draft beer.
Anodized ends to prevent rusting issues
Factory tested for leaks
Easy to mount
Mounts flush to wall, so it takes up less space
Commercial quality
Shut offs have built in one way check valves

Temporarily out of stock

Taprite Primary CO2 Regulator 2000PSI x 60PSI

$94.95

. Premium Taprite Dual Gauge Regulator. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA. Solid brass body with extra long nipple. Regulator has "shut down" safety system (blow off at 65 to 70 PSI.) Permanent Quad-Ring Seal on inlet nipple helps eliminate a source of leaks -- no need to use a new fiber washer each time a tank is changed. Heavy duty UL rated dual gauges. Left hand (LH) threaded ports with CGA 320 shank and nut. The Taprite Dual Gauge Regulator has a one year manufacturer's warranty. The bonnet is made from industrial zinc which can handle higher pressures. The regulator is approved for CO2, argon, nitrogen, beer gas, and beer gas blends.

Features:

  • To protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-65 PSIG.
  • Internal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.
  • CGA320 Inlet (Left hand thread)
  • Forged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up.
  • Body parts are 1/4" NPT
  • Outlet fittings feature a 5/16" barbed shutoff valve (Right hand thread)
  • Non-removable adjusting screw limits maximum delivery pressure to 50 PSIG
  • Front loading seat assembly is easily replaceable in the field
  • Working pressure range is 0-50psi.
  • 60lb (Right hand thread) and 2000lb (Left hand thread) Gauges

Add to Cart

10LB CO2 Cylinder Aluminium (New, certified and full)

$234.95

Brand new and recently manufactured these tanks will not need testing for years! Every Co2 cylinder is produced from high strength aluminum alloy 6061-T6. These tanks are popular because they are not as heavy as steel tanks and do not rust. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with required U.S. Department of Transportation and Transport Canada Markings. The 320 Valves are CGA approved, and have a male thread for Co2 Regulators.  1800 PSI CGA-320 Valve Approved for Canadian use

We sell them full and can refill on site. Tanks purchased from us can be exchanged for the cost of the fill plus $5.00. 

These tanks are sold full and therefore can not be shipped. You can purchase online for pick up only

Temporarily out of stock

2" gauge rubber boot

$3.95

Protect your C02 gauges with these boots. The gauges on the regulators tend to be very fragile. If you use our portable C02 systems these are a must as the tanks tend to fall over and get jostled about.

Add to Cart

5LB CO2 Cylinder (New, Certified and full)

$149.95

Brand new and recently manufactured these tanks will not need testing for years! Every Co2 cylinder is produced from high strength aluminum alloy 6061-T6. These tanks are popular because they are not as heavy as steel tanks and do not rust. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with required U.S. Department of Transportation and Transport Canada Markings. The 320 Valves are CGA approved, and have a male thread for Co2 Regulators.  1800 PSI CGA-320 Valve Approved for Canadian use

We sell them full and can refill on site. Tanks purchased from us can be exchanged for the cost of the fill plus $5.00. As the tanks are prefilled they can not be shipped.

Temporarily out of stock

ABC Permanent O-ring

$4.95

Tired of losing that fiber washer everytime you remove your regulator from your tank? Solve the problem by installing a permenent O-ring on your Co2 tank.

Add to Cart

CO2 Bombs (16gm) for C02 Injector

$3.25

These are currently unthreaded cartridges. These can be used with our Co2 Injector

Add to Cart

CO2 Injector

$32.95

CO2 Injector has 1/4" female flare thread opening. Uses 16g Cartridges.
Does not come with quick disconnect.
Caution</> the cartridges contain liquid co2 that will dispense at over 600PSI. With that in mind, we suggest having the faucet open before pushing more co2 into the keg. Also, do not push the inject lever when not hooked up to a keg as you will put over 600PSI into the quick disconnect and will blow the top threads off.

Temporarily out of stock

CO2 nylon washer

$.50

Replacement washer fits between our regulator and the CO2 cylinder.

Temporarily out of stock

CO2 Regulator Wrench

$4.95

This CO2 regulator Wrench is used to attach your regulator to your CO2 tank. It is designed to stay on the tank/regulator after attaching (it comes off the nut and hangs on the nipple) so you don't misplace it.

Add to Cart

Commercial Grade Gas Manifold 4 valve

$74.95

This manifold is part of our commercial grade series of gas distributors (manifolds). This solidly built manifold will serve four products from just one tank.

Engineered for durability
Laser engraved to identify lines quickly and easily
Solid brass outputs with 3/8" barbs to fit 5/16" and 3/8" lines
Corrosion resistant aluminum anodized body
Integrated check balls in each output to prevent back flow and protect your equipment
Shut off switches on each port to swap out kegs quickly
304 Stainless steel mounting brackets to keep your set up tidy

Add to Cart

Gas Manifold 3 Valve with Check valve

$39.95

Three way manifold comes with 3/8" OD inlet  with three 3/8" OD outlets makes a secure fit on 5/16" and 3/8" gas line. This solid CO2 distribution manifold will serve three products from just one tank. Mount the manifold to the wall, and be confident that this commercial quality piece of equipment will deliver the CO2 you need to properly dispense and enjoy your draft beer.

Add to Cart

Gauge 2" 0 - 2000lbs LHT

$13.95

Replacement gauge for most Hi side Regulators. Left Hand Thread

Add to Cart

Gauge Protector

$19.95

Fits Taprite, Cornelius and Norgren Regulators
Includes any hardware needed to adapt to those regulators.
Does NOT work with Foxx Equipment Company's economy (Chudnow) regulator.

Add to Cart

Mini Ball Valve 1/4"ntp to 1/4" barb with Check valve

$9.95

Mini Ball Valve 1/4"ntp to 1/4" barb with Check valve

Brass ball valves for regulator and air distribution needs. Comes complete with a check valve which stops liquid from backing up and damaging your regulators. Red shut off switch.

Add to Cart

Taprite Primary CO2 Regulator Kit 2000PSI x 60PSI

$109.95

This Taprite High Performance regulator will be the only regulator you ever buy. Based on the T742HP the plastic bonnet (part of the body) has been replaced with industrial zinc. This upgrade eliminates issues with the plastic parts failing. It also allows the regulator to handle high pressures without the plastic bonnet failing or exploding. This regulator is not just for CO2.

CO2
Argon
Nitrogen
Beer Gas
Beer Gas Blends

Premium Taprite Dual Gauge Regulator. Approved for use by all major breweries. Solid brass body with extra long nipple. Regulator has "shut down" safety system (blow off at 55 to 60 PSI.) Permanent Quad-Ring Seal on inlet nipple helps eliminate a source of leaks -- no need to use a new fiber washer each time a tank is changed. Heavy duty UL rated dual gauges. Left hand (LH) threaded ports with CGA 320 shank and nut. The Taprite Dual Gauge Regulator has a one year manufacturer's warranty.

Features an MFL threaded output connection.

Regulators are the heart of your draft dispensing system. Taprite regulators are a brand name. NSF approved. Manufactured in the USA.  We offer a one year in house warranty on all Taprite products. Taprite products will be the last ones you buy.

Please Note: This regulator comes with 4' of braided 1/4" hose your choice of either Ball lock or Pin Lock connector and a swivel connector

Add to Cart

Taprite T-bar style CO2 Regulator 2000PSI x 30PSI

$89.95

Premium Taprite T-Bar Low Pressure Regulator. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA.

Solid brass body with extra long nipple. Regulator has "shut down" safety system (blow off at 55 to 60 PSI.) Permanent Quad-Ring Seal on inlet nipple helps eliminate a source of leaks -- no need to use a new fiber washer each time a tank is changed. Heavy duty UL rated dual gauges. Left hand (LH) threaded ports with CGA 320 shank and nut.

The Taprite regulator has a one year manufacturer's warranty. The bonnet is made from industrial zinc which can handle higher pressures. The regulator is approved for CO2.

This particular regulator has a T-Bar that allows for easy and exact adjustments to your pressure.

Features a 5/16" OD barb shut off valve with check (Right hand thread)

Temporarily out of stock

Wye 1/4"MPT x1/4"FPT

$14.95

Chrome plated brass Y splitter base. 1/4" NPT right hand thread connects to your regulator. Easily configurable to anything you can think of.

Add to Cart

Draft Cleaning supplies

Brush Long line cleaning brush 1/4" x 66"

$9.95

Great for cleaning out 1/4 beer line or gas lines

Add to Cart

Brush Long Draft line cleaning brush 3/16 x 66"

$9.95

A brush everyone should have. Clean out any 3/16" ID beer line.

Temporarily out of stock

Line Cleaning Kit With Metal Pump - 4"

$99.95

For your line cleaning needs! Prevents build up of bacteria and residue, to ensure your next brew tastes the way you intended.

Simply attach the cleaning kit to your faucet, add your line cleaner and it is ready to use.

  • Includes:
    • 1L bottle
    • 4" metal pump
    • 3/16" hose and coupling nut for all standard shanks and towers
    • Standard faucet wrench
    • Double ended brush
Temporarily out of stock

Short Faucet & Tap Cleaning brush

$4.95

1 inch brush on one end 1/2 brush on the other end.

Add to Cart

Faucets, Taps and Shanks

Beer Faucet (chrome plated)

$21.95

Basic beer faucet. Chrome beer faucet for all dispensing applications. Connects to beer towers and shanks. Accepts standard size tap handles. Requires shank and tap handle, sold separately.

Add to Cart

Chrome Plated Beer Shank 4 1/2 inch (5/16) OD barb

$24.95

Comes with a back nut, plastic collar, and a welded 5/16" nipple. Requires a 1" hole saw for installation. Due to the length of the back nut and collar, the total length of the shank will be about 3".

Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling.

Add to Cart

Chrome Plated Beer Shank - 2 3/4 inch (5/16OD Barb)

$19.95

hrome plated brass shank with 1/4" Bore.

This is the perfect shank for fridge conversions, a jockey box, or a kegerator. Includes shank nut and black collar. This unit does not come with a Tail piece assembly.

  • Chrome Plated Brass
  • 2 3/4" Length
  • 1/4" Diameter
  • Integrated 5/16" Nipple

This is a recessed Shank, as such it IS compatible with our Intertap Auto-Close Spring. Allowing you to turn your Intertap faucet set-up into an auto-close one. 

Add to Cart

Faucet cover

$.99
Vinyl sleeve fits over the nozzle of most beer faucets to eliminate drips while not in use.
 
 

Add to Cart

Faucet Knob

$4.25

2.5" Black cylindrical plastic knob with brass insert

Add to Cart

Faucet Quick Disconnect Assembly

$54.95

Complete assembly. Comes with QD faucet adapter, chrome plated faucet with stainless steel lever, faucet knob and ball lock beverage out quick disconnect.

Temporarily out of stock

Faucet Wrench

$5.95

For installing and removing a faucet from a shank for cleaning. We encourage everyone who buys a faucet to buy a faucet wrench.

Add to Cart

Faucet, Knob And Shank Combo

$64.95

This kit includes the 4" shank with nipple, chrome faucet with stainless lever, and plastic 2.5" knob.

Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling.

Temporarily out of stock

Interap Stainless Steel Faucet

$49.95

The Intertap Stainless Steel Faucet is made with 304 Stainless Steel. and sports a wide range of revolutionary features. Traditionally beer taps use a rear sealing design, causing the beer in the tap to drain from the body of the tap due to a vent hole drilled directly into the front of the tap; causing a buildup of bacteria and wild yeast resulting in the quality of your beer to suffer. With the revolutionary Intertap tap design, worry no longer. The forward sealing design works to shut off the flow directly at the front of the tap, keeping your beer safe from harmful bacteria and wild yeast. 

Intertap uses a sliding shuttle that holds the o-ring in the ideal position, causing a more reliable seal to be made. They use an easily removable threaded spout allowing the most versatility available when replacing the spout whether they be a stout spout, an English sparkler spout, a growler filler, or even a ball lock post spout. This eliminates the need to replace your beer taps, instead simply purchase the spouts that you need. Fits standard US shanks.

Add to Cart

Intertap Tower Shank Assembly

$24.95

The Intertap Short Shank is an ideal recessed shank for your set up. Tower Shank with 90 degree Elbow. Recessed shank opening to accommodate most faucet designs and springs for self closing faucets. This is designed for a replacement on your 3" tower. Or if you want to add another faucet to your 3" tower, Cut a hole(7/8") and insert. Chrome plated brass shank and nipple. Nipple can use 1/4" or 3/16 if heat the line in hot water. 

Add to Cart

Intertap Chrome Plated Faucet

$29.95

The Intertap Chrome Plated Faucet is great entry level choice and sports a wide range of revolutionary features. Traditionally beer taps use a rear sealing design, causing the beer in the tap to drain from the body of the tap due to a vent hole drilled directly into the front of the tap; causing a buildup of bacteria and wild yeast resulting in the quality of your beer to suffer. With the revolutionary Intertap tap design, worry no longer. The forward sealing design works to shut off the flow directly at the front of the tap, keeping your beer safe from harmful bacteria and wild yeast. 

Intertap uses a sliding shuttle that holds the o-ring in the ideal position, causing a more reliable seal to be made. They use an easily removable threaded spout allowing the most versatility available when replacing the spout whether they be a stout spout, an English sparkler spout, a growler filler, or even a ball lock post spout. This eliminates the need to replace your beer taps, instead simply purchase the spouts that you need. Fits standard US shanks.

Add to Cart

Intertap Flow Control Faucet

$74.95

The 8473 model is the top of the range Intertap™ Flow Control (FC) Stainless Steel model, made from 304 steel.

    • Allows control of beer flow
    • Helps prevent bacterial and fungal growth with a better seal than typical spouts
  • Intertap™ uses a threaded spout that can easily be removed and replaced with a range of other spouts


Note: This item is the tap only to make a complete unit you will also need to purchase a tap handle and a shank.

Add to Cart

Intertap Flow Control Seal Kit

$8.95

his kit includes replacement o-rings and washers for your Intertap™ taps as well as the additional gaskets needed for the flow control function.
Works with Intertap™ Flow Control Faucet only.

Add to Cart

Intertap Liquid Ball Lock spout

$15.95

Further enhance and expand your Intertap dispensing experience with the Intertap Liquid Ball Lock Spout. 

Using this spout allows you to easily attach a bottle filler beer gun directly to your faucet. It makes direct transfer to a keg possible, and turns cleaning your beer lines into a simple task.

Compatible with both the Intertap Chrome Plated Faucet and Intertap Stainless Steel Faucet.

Simply un-screw the regular nozzle and screw on the Liquid Ball Lock Spout.

Add to Cart

Intertap Seal Kit

$7.95

This kit includes replacement o-rings and washers for your Intertap™ taps.
Works with Intertap™ Stainless Steel and Chrome Plated taps.

Contents:
1 - Lever Seat O-Ring 1 - Tap Coupling Washer 
1 - Shuttle Seat O-Ring
1 - Nozzle Washer
1 - Bonnet Washer
2 - Ball Seals

Add to Cart

Intertap Stainless Steel Faucet

$44.95

The Intertap Stainless Steel Faucet is made with 304 Stainless Steel. and sports a wide range of revolutionary features. Traditionally beer taps use a rear sealing design, causing the beer in the tap to drain from the body of the tap due to a vent hole drilled directly into the front of the tap; causing a buildup of bacteria and wild yeast resulting in the quality of your beer to suffer. With the revolutionary Intertap tap design, worry no longer. The forward sealing design works to shut off the flow directly at the front of the tap, keeping your beer safe from harmful bacteria and wild yeast. 

Intertap uses a sliding shuttle that holds the o-ring in the ideal position, causing a more reliable seal to be made. They use an easily removable threaded spout allowing the most versatility available when replacing the spout whether they be a stout spout, an English sparkler spout, a growler filler, or even a ball lock post spout. This eliminates the need to replace your beer taps, instead simply purchase the spouts that you need. Fits standard US shanks.
 
 

Add to Cart

Intertap Stout Spout

$15.95

Turn your Intertap tap into an stout/creamer tap with the use of this nozzle!
The Stout Spout has a removeable creamer/aerator disc inside, it is specially made to serve beers infused with nitrogen gas, and allows the nitrogen gas to flow smoothly through the faucet with the beer to create a smoother, creamier beer.
Simply un-screw the regular nozzle and screw on the Stout Spout and use as you would a stout tap.

Length: 2 1/2"
Note: This item is the Stout Spout only, it works ONLY with the Intertap line of taps.

Add to Cart

Kleen Plug

$2.95

The Kleen Plug beer faucet plug both keeps fruit flies out of your beer faucets when not in use, and scrubs them clean with an integral nylon brush each time you insert and remove the plug. 2½ inches long. Fits all beer faucets.To use: Before insertion, rinse the plug with warm water and shake dry. Insert the brush end first into the faucet opening until the plastic plug firmly seals the opening. Leave in place overnight. When removing, twist the plug to gently scrub the inside of the faucet.

To clean: Rinse with running water to release beer faucet residue from the brush. Occasionally soak the plug in a dilute sanitizing solution and then rinse before using.

Temporarily out of stock

Picnic Tap

$3.95

Durable plastic Shirron Picnic Tap. Barbed end and a smooth pour. This is a perfect little unit to have if you do not have enough faucets, or need portability. Features a two position valve (on and locked on) and a barbed fitting

Add to Cart

Shank - 3.5" with 5/16 OD barb

$19.95
Draft warehouse 2-1/2" long beer nipple shank assembly, chrome plated 1/4-Inch bore.
  • Fully assembled
  • Made from chrome plated brass
  • Standard size (7/8'' diameter) fits beer hex nuts.
  • Connect faucet on one end and beer line on the other end
  • Forged brass lock nut
 

Add to Cart

Stainless Steel Tap Handle Insert

$3.95

This will turn your wooden project into a tap handle for your home bar! Create your own tap handle/faucet know by inserting into your creation. Drill a 5/16" hole (5/8" deep) into a piece of wood and simply screw this 3/8" UNC threaded insert into the hole and you are finished! Inner threads will attach to any beer faucet (except for a few unusual imported faucets). 

Add to Cart

Tap Handle - Black Plastic

$2.95

Basic black plastic tap handle. Nothing fancy, but it works.

Add to Cart

Tap Handle Black, short, round

$2.95
     
 
Black plastic tap handle that is 2" in length. It is a short ball type variety.

Add to Cart

TapCap

$.95

Keep pesky fruit flies away! A simple and affordable way to prevent pests is to use the Tap Cap Soother on your draft faucet. This also creates a more sanitary environment which helps minimize bacteria build-up both inside and outside of your tap.

Add to Cart

Kegging Equipment

Used Ball Lock Keg 5USG with pressure relief valve Clean and tested

$89.95

Pressure tested 5 gallon, stainless steel cornelius style ball lock keg (includes pressure relief valve on lid). These tanks are guaranteed to hold pressure. 25" tall and 8.5" diameter. Tanks will show normal wear and tear. Kegs include the o-rings and poppets that were installed when we received the tanks. 

Add to Cart

1/4" MFL to 1/4" MFL Bulkhead Adapter

$19.95

1/4" MFL to 1/4" MFL Bulkhead Adapter Great for extending a run of hose without replacing the whole thing.

Add to Cart

Ball Lock Beer Out 1/4" Flared

$9.95

Black, beverage out quick disconnect with male flare fitting.


Barb is 1/4". 3/16" beverage tubing is recommended.

Tip N' Trick: Sometimes ball lock fittings are a challenge to quick disconnect "on and off" a cornelius keg. We recommend spraying the body connect on the keg first with a sanitizer solution which acts as a lubricant. When applying the ball lock fitting to the body connect, give a twist and turn to make it easier to connect. We've coined this term "Lube and Turn".

Add to Cart

Ball Lock Gas In 1/4" Flared

$9.95

 Gray, gas in quick disconnect with male flare fitting.

Barb is 1/4". 1/4" or 5/16" beverage tubing is recommended for gas line.

Tip N' Trick: Sometimes ball lock fittings are a challenge to quick disconnect "on and off" a cornelius keg. We recommend spraying the body connect on the keg first with a sanitizer solution which acts as a lubricant. When applying the ball lock fitting to the body connect, give a twist and turn to make it easier to connect. We've coined this term "Lube and Turn".

Add to Cart

Ball Lock O-Ring reconditioning Kit for Corny Kegs

$4.95

O-ring kit for ball lock kegs. Complete with lid ring, 2 dip tube rings and 2 post rings. When purchasing used kegs it is always a good idea to replace all the O-rings as they can harbour flavors and bacteria.

Dont overtighten when you replace the rings. General rules of plumbing apply. Hand tight and 1/4 - 1/2 turn extra is generally enough. Pressure test with water and adjust if needed in small increments. If you tighten until you can no longer turn there is a good chance you will crush or cut the seals and they will leak no matter how hard you tighten

Add to Cart

Carbonation Keg lid with ball lock post

$29.95

The carbonating keg lid provides the quickest and easiest means of force carbonating kegs and begin serving beer swiftly. Simply connect a 24" length of beverage tubing to the built in dip tube and a 0.5 micron carbonation stone (tubing and carbonation stone sold separately) to the opposite end of the beverage tubing.

Add to Cart

Gas side Dip Tube

$8.50

Replacement Gas dip tube for both ball and pin lock kegs

Add to Cart

Keg Lube 2 oz

$3.50

CIP film has replaced Lubrifilm as the keg lube of choice at The Vineyard! It is great for use with keg posts, clover clamp fittings, and any other brewery application where you need a little extra help. The bonus of the CIP Film is it can be removed with hot water more easily than LubriFilm, so clean up is simple and fast! FDA approved.

Add to Cart

New Ball lock Keg AMCYL 19L Dual Handle

$169.95

New, dual handle 5 gallon Cornelius ball lock keg. Top quality stainless steel American Cylinder (AMCYL) kegs, India model. The keg posts can be removed for cleaning.

Temporarily out of stock

New Ball lock Keg 2.5 USG Dual Handle

$159.95

Stackable with dual rubber handles up top and rubber skirt over bottom. 2.5USG

Temporarily out of stock

New Ball Lock Keg 2.5 USgal Single Handle

$149.95

2.5 Gallon Single Handle Ball Lock Keg AMCYL. Great for brewing smaller batches. NSF approved.
Measurs 8.5" Diameter and 14.75" Tall.

Temporarily out of stock

New Ball Lock Keg AMCYL 19L (5US gal) SIngle Handle

$139.95

Why deal with the hassles of old worn out kegs when you can have a brand new one at a reasonable price.

Brand New AMYCL 5 gallon Stainless Steel Kegs. NSF approved for all beverage use. Certified 304 Stainless Steel. NSF Approved for all Beverage uses. ISO 9000. Manual pull-ring relief valve that also automatically vents at 130PSI. Stainless Steel strap style carry handle for extended handle life. Rubber base reduces wear and tear on floors. Sanitary welds. Serial Numbers on each part. 25" Tall X 8.5" Wide.

Question: Why choose Certified Kegs

Answer: They are certified to be a safe, reliable, quality product. There are many kegs on the market. Only certified models are reliable food grade choices. Do not risk your beer!

Choosing a product certified by NSF lets you know the company complies with strict standards and procedures imposed by NSF. From extensive product testing and material analyses to unannounced plant inspections, every aspect of a product's development is thoroughly evaluated before it can earn our certification.

Most importantly, NSF certification is not a one-time event, but involves regular on-site inspections of manufacturing facilities and regular re-testing of products to ensure that they continue to meet the same high standards required to maintain certification over time. If for any reason a product fails to meet one or more certification criteria, NSF will take enforcement actions to protect you, including product recall, public notification or de-certification.

If it is not stamped. It is not NSF approved.

Temporarily out of stock

Petro Gel 4 oz (Keg Lube)

$8.50
  1. Keg Lube is a food grade lubricant for rubber and plastic parts. Using keg lube will extend the life of the O-rings on your kegs preventing cracks from developing and leaks from occurring.
Temporarily out of stock

Pin Lock Beer Out

$9.95

1/4 flared fitting. Beer out Pin Lock connector

Add to Cart

Pin Lock Gas in Flared

$9.95

1/4 flared fitting for your gas in. Pin Lock kegs

Add to Cart

Pin Lock O-Ring reconditioning Kit for Corny Kegs

$4.95

O-ring kit for pin lock Kegs. Complete with lid ring, 2 dip tube rings and 2 post rings. When purchasing used kegs it is always a good idea to replace all the O-rings as they can harbour flavors and bacteria.

Dont overtighten when you replace the rings. General rules of plumbing apply. Hand tight and 1/4 - 1/2 turn extra is generally enough. Pressure test with water and adjust if needed in small increments. If you tighten until you can no longer turn there is a good chance you will crush or cut the seals and they will leak no matter how hard you tighten

Add to Cart

Pin Lock Socket

$29.95

We made this socket so that you can easily remove gas and beverage body connects on Pin Lock style kegs. (Currently a 3/8" drive)

Add to Cart

Pressure Relief Valve

$11.95

New Relief valve for Cornelius, Firestone or Spartanburg Challenger V, Vi and Super Challenger. A easy fix for leaks, simply unscrew your old poppet and compare to the picture if it is plastic and looks the same it is this one.

Add to Cart

SS Swivel Set (nylon washer sold seperatly)

$2.95

1/4 inch swivel set. Makes cleaning easy when used for your thumb taps as you can remove the threaded connectors. Not as pictured. Nyon washer sold seperately 

Add to Cart

Tank Lid, manual pressure relief

$24.95

This is a new stainless steel universal replacement lid for home brew / soda kegs. Brand new lid comes with  pressure release valve with sturdy 1" metal ring to relieve pressure out of your keg.
Dimensions: 3 3/4" x 4 3/8"

Add to Cart

Used Pin Lock Kegs Used 19L 5USG No pressure release

$59.95

Cornelius Pin Lock Keg - Used, No Pressure Relief - Always great to have two or more styles dispensing at once! Beer is all about variety. Or have one serving, while another is carbonating!

These are used, 5 gallon stainless steel Pin Lock (Coke) Cornelius kegs. Great for dispensing home homebrewed beer, soda, or cider. For any sanitary liquid storage and dispensing needs. They include all fittings: dip tubes, poppets, gaskets and lid but we recommend you replace the seals. The lid is a hansen-style lid (no manual pressure relief pull-ring valve), although pressure can still be released by pressing down with a pointy object. We ensure the kegs hold pressure, however, these kegs are used and require a good cleaning and sanitizing before use. With used kegs, they can be approximately 30 years old, so expect some normal wear and tear. Dimensions: 22-24" Tall, 9" Wide.

Add to Cart

Used Pin Lock Kegs Used 19L 5USG with Pressure relief lid

$69.95

Cornelius Pin Lock Keg - Used, Pressure Relief lid - Always great to have two or more styles dispensing at once! Beer is all about variety. Or have one serving, while another is carbonating!

These are used, 5 gallon stainless steel Pin Lock (Coke) Cornelius kegs. Great for dispensing home homebrewed beer, soda, or cider. For any sanitary liquid storage and dispensing needs. They include all fittings: dip tubes, poppets, gaskets and lid but we recommend you replace the seals.  We ensure the kegs hold pressure, however, these kegs are used and require a good cleaning and sanitizing before use. With used kegs, they can be approximately 30 years old, so expect some normal wear and tear. Dimensions: 22-24" Tall, 9" Wide.

Temporarily out of stock

Misc. Equipment

Bottling Spigot 3/8"

$5.95

Fits a drilled 6.5 gallon pail. Requires a 1" diameter hole for installation. Rubber gasket goes on the outside of the bucket for a positive seal - don't overtighten. Use with 3/8" I.D. tubing.

Temporarily out of stock

Dual Threaded insert for Wooden tap Handle

$3.95

Create a taphandle of your very own and mount it with this easy to use threaded insert. Simply drill a 1/2" hole in the bottom of your wooden piece and thread the D1299 with a 3/8", 16 thread-per-inch bolt with a nut attached (a coin can also be used). When you are finished, remove the bolt and mount your new taphandle to your faucet!

Add to Cart

Fermzilla Carbonation Cap

$9.95

This carbonation cap is made out of plastic and is the same as the ones found in the FermZilla Pressure Kit. It is a screw-on cap with an integrated Cornelius ball lock fitting. The design is in place to fit most soft drink PET bottles.

The carbonation cap is a highly effective method to add and maintain carbonation in beverages for extended periods of time. Made from plastic, this carbonation cap will last years of use with virtually no maintenance.

With the cap, you can simply fill any old PET bottle with cold liquid of your choice and carbonate by connecting a ball lock disconnect.

Add to Cart

Hanger Bolt for Tap Handle

$1.95

This is a dual sided screw, one that goes into the D1298 and the other is a wood screw for going into a wood tap handle. 5/16 - 18 thread, total length ranges from 1.5 inches to 1.75 inches

Add to Cart

Latch top Bottle gasket

$.30

These Grolsch style Gaskets are a standard size and will fit either the 32 ounce or the 16 ounce EZ Cap bottles. Each gasket should last at least 5 or 6 uses

Add to Cart

« Return to Product Categories