View Cart

Faucets, Taps and Shanks

« Return to Product Categories

Beer Faucet (chrome plated)

$21.95

Basic beer faucet. Chrome beer faucet for all dispensing applications. Connects to beer towers and shanks. Accepts standard size tap handles. Requires shank and tap handle, sold separately.

Add to Cart

Chrome Plated Beer Shank 4 1/2 inch (5/16) OD barb

$24.95

Comes with a back nut, plastic collar, and a welded 5/16" nipple. Requires a 1" hole saw for installation. Due to the length of the back nut and collar, the total length of the shank will be about 3".

Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling.

Add to Cart

Chrome Plated Beer Shank - 2 3/4 inch (5/16OD Barb)

$19.95

hrome plated brass shank with 1/4" Bore.

This is the perfect shank for fridge conversions, a jockey box, or a kegerator. Includes shank nut and black collar. This unit does not come with a Tail piece assembly.

  • Chrome Plated Brass
  • 2 3/4" Length
  • 1/4" Diameter
  • Integrated 5/16" Nipple

This is a recessed Shank, as such it IS compatible with our Intertap Auto-Close Spring. Allowing you to turn your Intertap faucet set-up into an auto-close one. 

Add to Cart

Faucet cover

$.99
Vinyl sleeve fits over the nozzle of most beer faucets to eliminate drips while not in use.
 
 

Add to Cart

Faucet Knob

$4.25

2.5" Black cylindrical plastic knob with brass insert

Add to Cart

Faucet Quick Disconnect Assembly

$54.95

Complete assembly. Comes with QD faucet adapter, chrome plated faucet with stainless steel lever, faucet knob and ball lock beverage out quick disconnect.

Temporarily out of stock

Faucet Wrench

$5.95

For installing and removing a faucet from a shank for cleaning. We encourage everyone who buys a faucet to buy a faucet wrench.

Add to Cart

Faucet, Knob And Shank Combo

$64.95

This kit includes the 4" shank with nipple, chrome faucet with stainless lever, and plastic 2.5" knob.

Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling.

Temporarily out of stock

Interap Stainless Steel Faucet

$49.95

The Intertap Stainless Steel Faucet is made with 304 Stainless Steel. and sports a wide range of revolutionary features. Traditionally beer taps use a rear sealing design, causing the beer in the tap to drain from the body of the tap due to a vent hole drilled directly into the front of the tap; causing a buildup of bacteria and wild yeast resulting in the quality of your beer to suffer. With the revolutionary Intertap tap design, worry no longer. The forward sealing design works to shut off the flow directly at the front of the tap, keeping your beer safe from harmful bacteria and wild yeast. 

Intertap uses a sliding shuttle that holds the o-ring in the ideal position, causing a more reliable seal to be made. They use an easily removable threaded spout allowing the most versatility available when replacing the spout whether they be a stout spout, an English sparkler spout, a growler filler, or even a ball lock post spout. This eliminates the need to replace your beer taps, instead simply purchase the spouts that you need. Fits standard US shanks.

Add to Cart

Intertap Tower Shank Assembly

$24.95

The Intertap Short Shank is an ideal recessed shank for your set up. Tower Shank with 90 degree Elbow. Recessed shank opening to accommodate most faucet designs and springs for self closing faucets. This is designed for a replacement on your 3" tower. Or if you want to add another faucet to your 3" tower, Cut a hole(7/8") and insert. Chrome plated brass shank and nipple. Nipple can use 1/4" or 3/16 if heat the line in hot water. 

Add to Cart

Intertap Chrome Plated Faucet

$29.95

The Intertap Chrome Plated Faucet is great entry level choice and sports a wide range of revolutionary features. Traditionally beer taps use a rear sealing design, causing the beer in the tap to drain from the body of the tap due to a vent hole drilled directly into the front of the tap; causing a buildup of bacteria and wild yeast resulting in the quality of your beer to suffer. With the revolutionary Intertap tap design, worry no longer. The forward sealing design works to shut off the flow directly at the front of the tap, keeping your beer safe from harmful bacteria and wild yeast. 

Intertap uses a sliding shuttle that holds the o-ring in the ideal position, causing a more reliable seal to be made. They use an easily removable threaded spout allowing the most versatility available when replacing the spout whether they be a stout spout, an English sparkler spout, a growler filler, or even a ball lock post spout. This eliminates the need to replace your beer taps, instead simply purchase the spouts that you need. Fits standard US shanks.

Add to Cart

Intertap Flow Control Faucet

$74.95

The 8473 model is the top of the range Intertap™ Flow Control (FC) Stainless Steel model, made from 304 steel.

    • Allows control of beer flow
    • Helps prevent bacterial and fungal growth with a better seal than typical spouts
  • Intertap™ uses a threaded spout that can easily be removed and replaced with a range of other spouts


Note: This item is the tap only to make a complete unit you will also need to purchase a tap handle and a shank.

Add to Cart

Intertap Flow Control Seal Kit

$8.95

his kit includes replacement o-rings and washers for your Intertap™ taps as well as the additional gaskets needed for the flow control function.
Works with Intertap™ Flow Control Faucet only.

Add to Cart

Intertap Liquid Ball Lock spout

$15.95

Further enhance and expand your Intertap dispensing experience with the Intertap Liquid Ball Lock Spout. 

Using this spout allows you to easily attach a bottle filler beer gun directly to your faucet. It makes direct transfer to a keg possible, and turns cleaning your beer lines into a simple task.

Compatible with both the Intertap Chrome Plated Faucet and Intertap Stainless Steel Faucet.

Simply un-screw the regular nozzle and screw on the Liquid Ball Lock Spout.

Add to Cart

Intertap Seal Kit

$7.95

This kit includes replacement o-rings and washers for your Intertap™ taps.
Works with Intertap™ Stainless Steel and Chrome Plated taps.

Contents:
1 - Lever Seat O-Ring 1 - Tap Coupling Washer 
1 - Shuttle Seat O-Ring
1 - Nozzle Washer
1 - Bonnet Washer
2 - Ball Seals

Add to Cart

Intertap Stainless Steel Faucet

$44.95

The Intertap Stainless Steel Faucet is made with 304 Stainless Steel. and sports a wide range of revolutionary features. Traditionally beer taps use a rear sealing design, causing the beer in the tap to drain from the body of the tap due to a vent hole drilled directly into the front of the tap; causing a buildup of bacteria and wild yeast resulting in the quality of your beer to suffer. With the revolutionary Intertap tap design, worry no longer. The forward sealing design works to shut off the flow directly at the front of the tap, keeping your beer safe from harmful bacteria and wild yeast. 

Intertap uses a sliding shuttle that holds the o-ring in the ideal position, causing a more reliable seal to be made. They use an easily removable threaded spout allowing the most versatility available when replacing the spout whether they be a stout spout, an English sparkler spout, a growler filler, or even a ball lock post spout. This eliminates the need to replace your beer taps, instead simply purchase the spouts that you need. Fits standard US shanks.
 
 

Add to Cart

Intertap Stout Spout

$15.95

Turn your Intertap tap into an stout/creamer tap with the use of this nozzle!
The Stout Spout has a removeable creamer/aerator disc inside, it is specially made to serve beers infused with nitrogen gas, and allows the nitrogen gas to flow smoothly through the faucet with the beer to create a smoother, creamier beer.
Simply un-screw the regular nozzle and screw on the Stout Spout and use as you would a stout tap.

Length: 2 1/2"
Note: This item is the Stout Spout only, it works ONLY with the Intertap line of taps.

Add to Cart

Kleen Plug

$2.95

The Kleen Plug beer faucet plug both keeps fruit flies out of your beer faucets when not in use, and scrubs them clean with an integral nylon brush each time you insert and remove the plug. 2½ inches long. Fits all beer faucets.To use: Before insertion, rinse the plug with warm water and shake dry. Insert the brush end first into the faucet opening until the plastic plug firmly seals the opening. Leave in place overnight. When removing, twist the plug to gently scrub the inside of the faucet.

To clean: Rinse with running water to release beer faucet residue from the brush. Occasionally soak the plug in a dilute sanitizing solution and then rinse before using.

Temporarily out of stock

Picnic Tap

$3.95

Durable plastic Shirron Picnic Tap. Barbed end and a smooth pour. This is a perfect little unit to have if you do not have enough faucets, or need portability. Features a two position valve (on and locked on) and a barbed fitting

Add to Cart

Shank - 3.5" with 5/16 OD barb

$19.95
Draft warehouse 2-1/2" long beer nipple shank assembly, chrome plated 1/4-Inch bore.
  • Fully assembled
  • Made from chrome plated brass
  • Standard size (7/8'' diameter) fits beer hex nuts.
  • Connect faucet on one end and beer line on the other end
  • Forged brass lock nut
 

Add to Cart

Stainless Steel Tap Handle Insert

$3.95

This will turn your wooden project into a tap handle for your home bar! Create your own tap handle/faucet know by inserting into your creation. Drill a 5/16" hole (5/8" deep) into a piece of wood and simply screw this 3/8" UNC threaded insert into the hole and you are finished! Inner threads will attach to any beer faucet (except for a few unusual imported faucets). 

Add to Cart

Tap Handle - Black Plastic

$2.95

Basic black plastic tap handle. Nothing fancy, but it works.

Add to Cart

Tap Handle Black, short, round

$2.95
     
 
Black plastic tap handle that is 2" in length. It is a short ball type variety.

Add to Cart

TapCap

$.95

Keep pesky fruit flies away! A simple and affordable way to prevent pests is to use the Tap Cap Soother on your draft faucet. This also creates a more sanitary environment which helps minimize bacteria build-up both inside and outside of your tap.

Add to Cart

« Return to Product Categories